Inhaltsverzeichnis

1.  Als Herausgeber oder Mitautoren von Monografien

• Luhn, G., Lehner, W., Kabitzsch, K., Schlegel, B., Habich, D., Hahmann, M., Lunkwitz, D., Gellrich, A., Steinborn, A., Kirmizigül, D., Identitätsbasierte Informations-Transformation (iBIT): Grundlage eines neuen Informationsbegriffs mit konkreten Anwendungen in Methodik und Praxis der Informatik.
  • In: Nicole Zeise (Hg.), Matthias Fischer (Hg.), Marco Link (Hg.): Anwendungsorientierte Organisationsgestaltung: Prozessmanagement, Systementwicklung, Modellierung. Baar-Verlag, 2011, ISBN 978-3935536615.
• Arbeitsgruppen „Schnittstellenintegration und Interoperabilität“ und „Kommunikation“ der BMBF/VDE Innovationspartnerschaft AAL, AAL-Anwendungsszenarien.
  • VDE Verband der Elektrotechnik Elektronik Informationstechnik e.V. (Hrsg.), Juni 2011, ISBN 978-3-925512-22-3.
• Arbeitsgruppe „Bestandsaufnahme“ der BMBF/VDE Innovationspartnerschaft AAL, Ambient Assisted Living (AAL). Komponenten, Projekte, Services. Eine Bestandsaufnahme.
  • VDE Verlag GmbH, Berlin, 2011, ISBN 978-3-8007-3328-6.
• Ryssel, U., Dibowski, D., Frank, H. and Kabitzsch, K., LonWorks.
  • In: The Industrial Electronics Handbook, Second Edition, Volume 2: Industrial Communication Systems, CRC Press, March 2011, ISBN 978-1-4398-0281-6, Chapter 41.
• Eichelberg, M., Kabitzsch, K., et al., Interoberabilität von AAL-Systemkomponenten. Teil 1: Stand der Technik.
  • VDE Verlag, Berlin, 2010, ISBN 978-3-8007-3196-1.
• Vasyutynskyy, V., Send-on-Delta-Abtastung in PID-Regelungen (engl.: Send-on-Delta Sampling in PID Controls).
  • Dissertation, Vogt Verlag, Dresden, 2009, ISBN 978-3-938860-28-1.
• Kabitzsch, K., und Vasyutynskyy, V. (Hrsg.), Entwurf, Inbetriebnahme und Wartung von Automationssystemen.
  • Workshop-Tagungsband. Dresden, März 2008, ISBN 978-3-86780-070-9.
• Anke, J., Verteilungsplanung für Komponenten in Smart Item Umgebungen.
  • Dissertation, TUDpress, Verlag der Wissenschaften GmbH, 2008, ISBN 978-3-940046-61-1.
• Neugebauer, M., Energieeffiziente Anpassung des Arbeitszyklus in drahtlosen Sensornetzen.
  • Dissertation, Vogt Verlag, 2007.
• Ploennigs, J., Control Network Performance Engineering - Qualitätsorientierter Entwurf von CSMA-Netzwerken der Automation.
  • Dissertation, Informationstechnik. Vogt Verlag, 2007.
• Kabitzsch, K., und Vasyutynskyy, V. (Hrsg.), Test und Diagnose von Maschinen, Anlagen und ihrer Software.
  • Tagungsband. Dresden, November 2006, ISBN 3-86005-553-4.
• Kabitzsch, K., Dibowski, H., und Karavan, A. (Hrsg.), Automatisierter Entwurf von Gebäudeautomationssystemen.
  • Tagungsband, Workshop. Dresden, Dezember 2005, ISBN 3-86005-511-9.
• Schach, R., Kabitzsch, K., Höschele, V., und Otto, J., Integriertes Facility Management.
  • expert Verlag, Renningen, 2005, ISBN 3-8169-2467-0.
• Kabitzsch, K., und Neugebauer, M. (Hrsg), Tagungsband, Workshop "Netzwerke in der Gebäudeautomation - Modellierung, Voraussage, Planung".
  • Dresden, November 2003, ISBN 3-86005-409-0.
• Höschele, V., Kabitzsch, K., Knabe, G., und Schach, R., Tagungsband, Workshop "Brücken zwischen Gebäudeautomation und Facility Management".
  • Dresden, November 2003, ISBN 3-86005-402-3.
• Kabitzsch, K., Dietrich, D., und Pratl, G., LonWorks Gewerkeübergreifende Systeme.
  • VDE Verlag Berlin Offenbach 2002, ISBN 3-8007-2669-6.
• Kabitzsch, K., "LonWorks Nodes" and "Tools" Chapter 3 and 12.
  • In: Loy, D., Dietrich, D., und Schweinzer, H. (Eds.): Open Control Networks, Kluwer Academic Publishers Boston, Dordrecht, London, 2001, ISBN 0-7923-7406-1, pp. 59-72 and 273-307.
• Schach, R., Kabitzsch, K., Knabe, G., und Höschele, V., Brücken zwischen Gebäudeautomation und Facility Management.
  • TU Dresden, 2002, ISBN 3-86005-354-X.
• Schneider, U., Werner, D. (Hrsg.) u. a., "Taschenbuch der Informatik.":http://www.htwm.de/uschneid/tb-informatik.html
  • 5. Völlig neu bearb. Auflage, Carl Hanser Verlag München Wien 2004, ISBN 3-446-22584-6.
  • 4. aktualisierte Auflage, Carl Hanser Verlag München Wien 2001, ISBN 3-446-21753-3.
  • 3. Völlig neu bearb. Auflage, Carl Hanser Verlag München Wien 2000, ISBN 3-446-21331-7.
  • 2. Auflage: Fachbuchverlag Leipzig 1995, ISBN 3-343-00892-3.
• Dietrich, D. (Hrsg.) u. a., LON-Technologie - Verteilte Systeme in der Anwendung.
  • 2. Auflage, Hüthig Verlag Heidelberg 1999, ISBN 3-7785-2770-3.
  • 1. Auflage, Hüthig Verlag Heidelberg 1997, ISBN 3-7785-2581-6.
  • 1. Auflage in chinesischer Sprache 2003.
• Dietrich, D. (Hrsg.) u.a., LON-Technologija - Postrojenije Raspredeljennych Priloschenii.
  • Verlag Permskowo Gosudarstwenowo Technitscheskowo Uniwersiteta, Perm, 1998, ISBN 5-88187-052-2.
• Kabitzsch, K. (Hrsg.), Automatisierungskonzepte mit dezentraler Intelligenz (LONWORKS).
  • Tagungsband der Tagung an der TU Dresden, Oktober 1995.
• Kabitzsch, K., Mikrorechner in der Automatisierungspraxis - Ausagewählte Probleme der Software- und Hardwaregestaltung.
  • Akademie-Verlag, Berlin, 1987, ISBN 3-05-500243-1.

2.  Als Veranstalter von Tagungen und Workshops

• 7th IEEE International Workshop on Factory Communication Systems (WFCS 2008)
  • TU Dresden, May 20-23, 2008.
• Stromhandel für energieintensive Unternehmen
  • Workshop des Deutschen Verbandes für Facility Management, Regionalverband Sachsen, TU Dresden, Fakultät Informatik, 21.01.2004.
• Netzwerke in der Gebäudeautomation - Modellierung, Voraussage, Planung
  • Workshop Dresden, November 2003.
• Brücken zwischen Gebäudeautomation und Facility Management
  • Workshop Dresden, November 2003.
• Verbindung von CAFM- und ePortal-Systemen
  • Workshop des Deutschen Verbandes für Facility Management, Regionalverband Sachsen, TU Dresden, Fakultät Informatik, 15.01.2003.
• Brücken zwischen Gebäudeautomation und Facility Management
  • Workshop, TU Dresden, Dezember 2002.
• Erfassung von Gebäudegrundrissen für Facility Management
  • Workshop des Deutschen Verbandes für Facility Management, Regionalverband Sachsen, TU Dresden, Fakultät Informatik, 16.01.2002.
• Energiemanagement in Gebäuden
  • Workshop des Deutschen Verbandes für Facility Management, Regionalverband Sachsen, TU Dresden, Fakultät Informatik, 14.11.2001.
• Datenbanken in Softwarelösungen des Facility Management
  • Workshop des Deutschen Verbandes für Facility Management, Regionalverband Sachsen, TU Dresden, Fakultät Informatik, 16.05.2001.
• Ergebnisse bei der Einführung des Energie- und Wartungsmanagements in Gebäuden
  • Workshop des Deutschen Verbandes für Facility Management, Regionalverband Sachsen, TU Dresden, Fakultät Informatik, 15.11.2000.
• Neue Entwicklungen im Facility Managagement
  • Workshop des Deutschen Verbandes für Facility Management, Regionalverband Sachsen, TU Dresden, Fakultät Informatik, 19.01.2000.
• Praxis und Organisation des Facility Managements
  • Workshop des Deutschen Verbandes für Facility Management, Regionalverband Sachsen, TU Dresden, Fakultät Informatik, 17.03.1999.
• Jahr 2000-Umstellung in Embedded Systems der TGA
  • Workshop des Deutschen Verbandes für Facility Management, Regionalverband Sachsen, TU Dresden, Fakultät Informatik, 20.01.1999.

3.  Beiträge in Sammelwerken und Zeitschriften

3.1.  2012

• Clement, J., Ploennigs, J., and Kabitzsch, K., Implementation and Detection of ADL-Parallelism based on Smart meter.
  • AAL Forum, Eindhoven, The Netherlands, September 2012.
• Clement, J., Plönnigs, J., und Kabitzsch, K., Intelligente Zähler: ADLs erkennen und individualisieren.
  • 5. Deutscher AAL-Kongress, Berlin, Januar 2012, ISBN 978-3-8007-3400-9.
• Clement, J., Ploennigs, J., and Kabitzsch, K., Smart Meter: Detect and Individualize ADLs.
  • 5. Deutscher AAL-Kongress, Berlin, Januar 2012, ISBN 978-3-642-27491-6.
• Dementjev, A., Hensel, B., Ribbecke, H.-D., and Kabitzsch, K., Adaptive APC strategies for a PVD process: a case study.
  • Proceedings of the 12th Advanced Process Control and Manufacturing Conference (APCM 2012), Grenoble, France, April 2012, pp. 29-34.
• Dennert, A., Gössling, A., Krause, J., and Wollschlaeger, M., Vertical Data Integration in Automation based on IEC 61499.
  • Proceedings of the 9th IEEE International Workshop on Factory Communication Systems (WFCS 2012), Lemgo/Detmold, Germany, May 2012.
• Forns-Samso, F., Laine, T., and Hensel, B., Building information modeling supporting facilities management.
  • Gudnason & Scherer (Eds.): eWork and eBusiness in Architecture, Engineering and Construction: ECPPM 2012, CRC Press, Taylor & Francis Group, London, ISBN 978-0-415-62128-1, pp. 51-57, DOI 10.1201/b12516-10.
• Gellrich, A., Dennert, A., Lunkwith, D., and Kabitzsch, K., Rule-Driven Manufacturing Control Based On Ontologies.
  • Proceedings of the 17th International Conference on Emerging Technologies and Factory Autmation (ETFA 2012), Kraków, Poland, September 2012.
• Guruz, R., Katranuschkov, P., Scherer, R. J., Kaiser, J., Grunewald, J., Hensel, B., Kabitzsch, K., and Liebich, T., Ontological specification for the model integration in ICT building energy systems.
  • Gudnason & Scherer (Eds.): eWork and eBusiness in Architecture, Engineering and Construction: ECPPM 2012, CRC Press, Taylor & Francis Group, London, ISBN 978-0-415-62128-1, pp. 939-950, DOI 10.1201/b12516-147.
• Hensel, B., Ploennigs, J., Vasyutynskyy, V., and Kabitzsch, K., A Simple PI Controller Tuning Rule for Sensor Energy Efficiency with Level-Crossing Sampling.
  • Proceedings of the 9th International Multi-Conference on Systems, Signals and Devices (SSD-SAC 2012), Chemnitz, Germany, March 2012, ISBN 978-1-4673-1591-3.
• Hensel, B., Vasyutynskyy, V., Ploennigs, J., and Kabitzsch, K., An adaptive PI controller for room temperature control with level-crossing sampling.
  • Proceedings of the UKACC International Conference on Control, Cardiff, UK, September 2012, ISBN 978-1-4673-1558-6, pp. 197-204.
• Kabitzsch, K., Klick, M., Steinbach, A., Weber, A., Advanced Process Control Goes Manufacturing: APCM Conference in Europe.
  • Future Fab International, Issue 41, 2012.
• Krause, J., and Kabitzsch, K., A generic Approach for Reliability Predictions considering non-uniformly Deterioration Behaviour.
  • Journal of Physics, Conference Series, Volume 364 (COMADEM 2012), June 2012, ISSN 1742-6588 (Print), ISSN 1742-6596 (Online).
• Krause, J., and Kabitzsch, K., Reliability Predictions based on Breakdown Data with Respect to Aging Conditions.
  • 2nd International Congress on eMaintenance, Lulea, Sweden, December 2012.
• Lipprandt, M., Welge, R., Eichenberg, M., Eichenberg, E., Engelien, H., Kabitzsch, K., Gök, M., Busch, B.-H., Laurila-Epe, J., Heusinger, S., Moritz, G., und Hein, A., Beschreibungsmethodik für AAL-Integrationsprofile.
  • 42. Jahrestagung der Gesellschaft für Informatik und 57. Jahrestagung der Deutschen Gesellschaft für Medizinische Informatik, Biometrie und Epidemiologie e.V. (GMDS), Braunschweig, September 2012.
• Luhn, G., The Causal-Compositional Concept of Information. Part I. Elementary Theory: From Decompositional Physics to Compositional Information.
  • Information, Volume 3, Issue 1, 2012, ISSN 2078-2489, doi:10.3390/info3010151, pp. 151-174.
• Naake, J., Gellrich, A., und Kabitzsch, K., Automatisierte Steuerungstests vereinfachen die virtuelle Inbetriebnahme in der Fabrikautomation.
  • atp edition - Automatisierungstechnische Praxis 4/2012, 54. Jahrgang (2012), Oldenbourg Industrieverlag, ISSN 2190-4111, S. 14-16.
• Ploennigs, J., Hensel, B., Dibowski, H., and Kabitzsch, K., BASont - A modular, adaptive Building Automation System Ontology.
  • Proceedings of the 38th Annual Conference of the IEEE Industrial Electronics Society (IECON 2012), Montréal, Canada, October 2012.
• Plönnigs, J., Ryssel, U., Dibowski, H., Lehmann, M., und Kabitzsch, K., Entwurfsassistenz in der Gebäudeautomation.
  • atp edition (Automatisierungstechnische Praxis) 9/2012, 54. Jahrgang B3654, Oldenbourg Industrieverlag, S. 28-35.
• Ryssel, U., Ploennigs, J., and Kabitzsch, K., Automatic library migration for the generation of hardware-in-the-loop models.
  • Science of Computer Programming, Volume 77, Issue 2, February 2012, pp. 83-95.
• Ryssel, U., Ploennigs, J., and Kabitzsch, K., Reasoning of Feature Models from Derived Features.
  • Proceedings of the 11th International Conference on Generative Programming and Component Engineering (GPCE 2012), Dresden, Germany, September 2012, pp. 21-30.
• Schwenke, C., Gellrich, A., Wagner, T., and Kabitzsch, K., Tailback Recognition and Cause Identification in Manufacturing Plants.
  • Proceedings of the 12th Advanced Process Control and Manufacturing Conference (APCM 2012), Grenoble, France, April 2012, pp. 128-132.
• Schwenke, C., Vasyutynskyy, V., Ziegenbalg, J., and Kabitzsch, K., Simulation based Forecast of Supermarket Sales.
  • Proceedings of the 17th International Conference on Emerging Technologies and Factory Autmation (ETFA 2012), Kraków, Poland, September 2012.
• Schwenke, C., Wagner, T., Gellrich, A., and Kabitzsch, K., Event Based Recognition and Source Identification of Transient Tailbacks in Manufacturing Plants.
  • Proceedings of the 2012 Winter Simulation Conference, Berlin, Germany, December 2012.
• Stein, D., Lehmann, M., Ploennigs, J., and Kabitzsch, K., Sensors, models and platform for ambient control.
  • Proceedings of the 38th Annual Conference of the IEEE Industrial Electronics Society (IECON 2012), Montréal, Canada, October 2012.
• Wagner, T., Gellrich, A., Schebiella, N., and Kabitzsch, K., Offline Analysis, Lot Tracking and Wafer Defect Analysis in Semiconductor Automated Material Handling Systems.
  • Proceedings of the 12th Advanced Process Control and Manufacturing Conference (APCM 2012), Grenoble, France, April 2012, pp. 122-127.
• Wagner, T., Schwenke, C., and Kabitzsch, K., Modeling and Wafer Defect Analysis in Semiconductor Automated Material Handling Systems.
  • Proceedings of the 2012 Winter Simulation Conference, Berlin, Germany, December 2012.

3.2.  2011

• Ahmed, A., Korres, N. E., Ploennigs, J., Elhadi, H., and Menzel, K., Mining building performance data for energy-efficient operation.
  • Advanced Engineering Informatics 25 (2011), Nr. 2, Elsevier, April 2011, pp. 341-354.
• Clement, J., Plönnigs, J., and Kabitzsch, K., Characterization and Communication of an AAL-Business-Model.
  • AAL-Forum 2011, Lecce, Italy, September 2011.
• Clement, J., Plönnigs, J., and Kabitzsch, K., Enhanced Inactivity Diagram to Meet Elderly Needs.
  • AAL-Forum 2011, Lecce, Italy, September 2011.
• Clement, J., Plönnigs, J., und Kabitzsch, K., Lernen eines ADL-Tagesprofils menschlichen Verhaltens mittels hierarchisch aufgebautem Markov Modell.
  • Demographischer Wandel - Assistenzsysteme aus der Forschung in den Markt (Tagungsband des 4. Deutschen AAL-Kongresses), VDE Verlag, Berlin, Januar 2011, ISBN 978-3-8007-3323-1.
• Dementjev, A., Benesch, M., Kubin, H., Metzner, C., and Hartung, U., Process Analysis and Control Engineering for APC in EB PVD and PMS Coating Processes.
  • Proceedings of the 11th European AEC/APC Conference, Dresden, Germany, April 2011, pp. 167-172.
• Dementjev, A., and Ribbecke, H.-D., Improvement of Prediction Performance in Virtual Metrology.
  • Proceedings of the 11th European AEC/APC Conference, Dresden, Germany, April 2011, pp. 71-76.
• Dibowski, H., and Kabitzsch, K., Ontology-Based Device Descriptions and Device Repository for Building Automation Devices.
  • EURASIP Journal on Embedded Systems, Volume 2011, 2011, ISSN 1687-3955, Article ID 623461.
• Gellrich, A., Wagner, T., Vasyutynskyy, V., and Kabitzsch, K., Modeling of Transport Times in Partly Observable Factory Logistic Systems based on Event Logs.
  • Proceedings of the 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, September 2011.
• Gellrich, A., Wagner, T., Vasyutynskyy, V., and Kabitzsch, K., Multi-factor Statistic Modelling of Transport Processes on Factory Level in Semiconductor Manufacturing.
  • Proceedings of the 11th European AEC/APC Conference, Dresden, Germany, April 2011, pp. 59-63.
• Hensel, B., and Kabitzsch, K., Energy-Efficient Server Rack Cooling using Feedforward Control: Benefits and Problems.
  • Proceedings of the IASTED International Conference Parallel and Distributed Computing and Networks (PDCN 2011), Innsbruck, Austria, February 2011, pp. 1-8.
• Krause, J., and Kabitzsch, K., A Generic Approach for Predictive Maintenance considering changing Ageing Conditions.
  • International Journal of Performability Engineering (IJPE) - Special Issue "eMaintenance", November 2011.
• Ploennigs, J., Ahmed, A., Hensel, B., Stack, P., and Menzel, K., Virtual sensors for estimation of energy consumption and thermal comfort in buildings with underfloor heating.
  • Advanced Engineering Informatics, In Press, Corrected Proof, Available online 17 August 2011, ISSN 1474-0346, DOI: 10.1016/j.aei.2011.07.004.
• Ploennigs, J., Dibowski, H., Ryssel, U., and Kabitzsch, K., Holistic Design of Wireless Building Automation Systems.
  • Proceedings of the 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, September 2011.
• Ploennigs, J., Dibowski, H., Ryssel, U., and Kabitzsch, K., Ontology Models and Design Patterns for Building Automation.
  • Proceedings of the 2nd Workshop organised by the EEB Data Models Community, CIB Conference W078-W012, Sophia Antipolis, France, October 2011, ISBN 978-92-79-20811-9, doi 10.2759/52595, pp. 62-78.
• Rieckhof, F., Dibowski, H., and Kabitzsch, K., Formal Validation Techniques for Ontology-based Device Descriptions.
  • Proceedings of the 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, September 2011.
• Röder, A., Lehmann, M., and Kabitzsch, K., Monitoring Service Choreographies.
  • Proceedings of the IEEE 9th International Conference on Industrial Informatics (INDIN 2011), Caparica, Lisbon, Portugal, July 2011.
• Ryssel, U., Distel, F., and Borchmann, D., Fast Computation of Proper Premises.
  • Proceedings of the 8th International Conference on Concept Lattices and Their Applications (CLA 2011), Nancy, France, October 2011, pp. 101-113. Best Paper Award.
• Ryssel, U., Ploennigs, J., and Kabitzsch, K., Extraction of feature models from formal contexts.
  • Proceedings of the 15th International Software Product Line Conference, Munich, Germany, August 2011, pp. 4:1-4:8.
• Schmidt, F., Kabitzsch, K., Clement, J., Hildebrandt, D., Richter, K.-P., und Hirschfeld, D., Automatisierte Assistenz in Gefahrensituationen - das Projekt AutAGef und sein Geschäftsmodell.
  • Demographischer Wandel - Assistenzsysteme aus der Forschung in den Markt (Tagungsband des 4. Deutschen AAL-Kongresses), VDE Verlag, Berlin, Januar 2011, ISBN 978-3-8007-3323-1.
• Schwenke, C., Vasyutynskyy, V., and Kabitzsch, K., Analysis and Simulation of Sales Receipt Data in Supermarkets.
  • Proceedings of the 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, September 2011.
• Schwenke, C., Vasyutynskyy, V., Röder, A., and Kabitzsch, K., Analysis of Maintenance Histories of Industrial Equipment with Frequent Maintenance Demand.
  • Proceedings of the IEEE 9th International Conference on Industrial Informatics (INDIN 2011), Caparica, Lisbon, Portugal, July 2011.
• Theiss, S., and Kabitzsch, K., Efficient Agent Interaction in Automation Networks: A Simulation Study.
  • Proceedings of the 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, September 2011.

3.3.  2010

• Ahmed, A., Ploennigs, J., Menzel, K., and Cahill, B., Multi-dimensional building performance data management for continuous commissioning.
  • Advanced Engineering Informatics, Volume 24, Issue 4, Construction Informatics, November 2010, pp. 466-475.
• Benesch, M., Kubin, H., and Kabitzsch, K., Adaptive database for universal data source access in industrial environments for ADM.
  • Proceedings of the 12th Mechatronics Forum Biennial International Conference, Swiss Federal Institute of Technology, ETH Zurich, Switzerland , Proceedings Book 2/2, June 2010, ISBN 978-3-033-02507-3, pp. 210-215.
• Dementjev, A., Hensel, B., Kubin, H., Ribbecke, H.-D., and Kabitzsch, K., Control of a Vacuum Coating Process with long Dead-Time and an Integrator: A Case Study.
  • Proceedings of the 9th IFAC Workshop on Time Delay Systems (TDS 2010), Prague, Czech Republic, June 2010.
• Dementjev, A., Ribbecke, H.-D., and Kabitzsch, K., Improvement of prediction performance for data-driven virtual sensors.
  • Proceedings of the 15th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2010), Bilbao, Spain, September 2010.
• Dibowski, H., and Kabitzsch, K., Ontology Based Device Descriptions and Triple Store Based Device Repository for Automation Devices.
  • Proceedings of the 15th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2010), Bilbao, Spain, September 2010.
• Dibowski, H., and Kabitzsch, K., Generic Specification Toolchain for Ontology Based Device Descriptions.
  • Proceedings of the 15th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2010), Bilbao, Spain, September 2010.
• Dibowski, H., Ploennigs, J., and Kabitzsch, K., Automated Design of Building Automation Systems.
  • IEEE Transactions on Industrial Electronics, Volume 57, Issue 11, November 2010, pp. 3606-3613.
• Gellrich, A., Vasyutynskyy, V., and Kabitzsch, K., Model based analysis of complex systems.
  • Design, Automation & Test in Europe (DATE 2010 - University booth), Dresden, Germany, March 2010. Poster presentation.
• Gellrich, A., Vasyutynskyy, V., and Kabitzsch, K., Using SECS/GEM logs for analyzing internal transport processes in semiconductor equipment.
  • Proceedings of the 10th European AEC/APC Conference, Catania, Italy, April 2010, pp. 106-108.
• Hensel, B., Ploennigs, J., Kabitzsch, K., und Spelsberg, J., Energieeffizienz durch neue Raumautomationskonzepte.
  • Tagungsband der 14. Internationalen Passivhaustagung, Dresden, Mai 2010, ISBN 978-3-00-031154-3, S. 537-538.
• Krause, J., Cech, S., Rosenthal, F., Gössling, A., Groba, C., and Vasyutynskyy, V., Factory-wide predictive maintenance in heterogeneous environments.
  • Proceedings of the 8th IEEE International Workshop on Factory Communication Systems (WFCS 2010). WIP-Track, Nancy, France, May 2010, pp. 153-156.
• Krause, J., and Kabitzsch, K., Context-sensitive predictions of machine reliability.
  • Proceedings of the 1st international congress on eMaintenance, Lulea, Sweden, June 2010.
• Luhn, G., Towards an Ontology of Information and succeeding Fundamentals in Computing Science.
  • Proceedings of the 4th International Conference on the Foundations of Information Science (FIS 2010), Vol. 9, No. 2 (2011), Beijing, China, August 2010, ISSN 1726-670X, pp. 444-453.
• Luntovskyy, A., Vasyutynskyy, V., and Kabitzsch, K., Propagation modeling and placement algorithms for wireless sensor networks.
  • Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE 2010), Bari, Italy, July 2010.
• Naake, J., Analysesoftware für SPS-gesteuerte Anlagen.
  • SPS-Magazin SPS-Special/2010, 23. Jahrgang (2010), Technik-Dokumentations-Verlag, ISSN 0935-0187, S. 199-200.
• Naake, J., Fehler schnell aufspüren.
  • elektrotechnik 11/2010, 92. Jahrgang (2010), Vogel Business Media GmbH, ISSN 1619-9405, S. 30.
• Naake, J., Unter Strom.
  • MSR Magazin 6/2010, 22. Jahrgang (2010), Vereinigte Fachverlage GmbH, ISSN 0936-692X, S. 12.
• Oezluek, A. C., Ploennigs, J., and Kabitzsch, K., A Generic Framework for Synthesis and Optimization of System Designs in the Example of Building Automation Systems.
  • Proceedings of the 15th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2010), Bilbao, Spain, September 2010.
• Oezluek, A. C., Ploennigs, J., and Kabitzsch, K., Designing Building Automation Systems Using Evolutionary Algorithms with Semi-Directed Variations.
  • Proceedings of the 2010 IEEE International Conference on Systems, Man, and Cybernetics, Istanbul, Turkey, October 2010, ISBN 978-1-4244-6586-6, pp. 2328-2335.
• Ploennigs, J., Ahmed, A., Stack, P., and Menzel, K., Model-based virtual sensors for room heat metering and energy consumption analysis in buildings with renewable energy sources.
  • Proceedings of the International Conference on Computing in Civil and Building Engineering (ICCCBE), Nottingham, UK, June 2010.
• Ploennigs, J., Hensel, B., and Kabitzsch, K., Wireless, Collaborative Virtual Sensors for Thermal Comfort.
  • Proceedings of the 2nd ACM Workshop on Embedded Sensing Systems for Energy-Efficiency in Buildings (BuildSys 2010), Zurich, Switzerland, November 2010, ISBN 978-1-4503-0458-0, pp. 79-84.
• Ploennigs, J., Vasyutynskyy, V., and Kabitzsch, K., Ultra-low power wireless communication.
  • The Industrial Electronics Handbook, J. D. Irwin and B. M. Wilamowski, Eds. IEEE Press, 2010.
• Reiter, M., und Naake, J., Debugging vom Feinsten.
  • de-Magazin 5/2010, 85. Jahrgang (2010), Hüthig & Pflaum Verlag, ISSN 1617-1160, S. 62-63.
• Ryssel, U., Ploennigs, J., and Kabitzsch, K., Automatic Variation-Point Identification in Function-Block-Based Models.
  • Proceedings of the 9th International Conference on Generative Programming and Component Engineering (GPCE 2010), Eindhoven, The Netherlands, October 2010, pp. 23-32.
• Schwenke, C., Vasyutynskyy, V. and Kabitzsch, K., Simulation and Analysis of Buying Behavior in Supermarkets.
  • Proceedings of the 15th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2010), Bilbao, Spain, September 2010.
• Theiss, S., Pitsch, H., and Kabitzsch, K., Omsis - Emulation, Hardware-in-the-Loop.
  • EDition ENTERPRISE DYNAMICS Simulation News, Ausgabe 2010-2011, 2010, S. 10-11.
• Vasyutynskyy, V., Gellrich, A., Kabitzsch, K., and Wustmann, D., Analysis of Internal Logistic Systems Based on Event Logs.
  • Proceedings of the 15th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2010), Bilbao, Spain, September 2010.
• Vasyutynskyy, V., and Kabitzsch, K., A comparative study of PID control algorithms adapted to Send-on-Delta sampling.
  • Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE 2010), Bari, Italy, July 2010.
• Vasyutynskyy, V., and Kabitzsch, K., Event-based control: Overview and generic model.
  • Proceedings of the 8th IEEE International Workshop on Factory Communication Systems (WFCS 2010), Nancy, France, May 2010, pp. 271-279.
• Wagner, T., Gellrich, A., Vasyutynskyy, V., und Kabitzsch, K., Offline Analysis, Modelling and Simulation of Transport Systems in Semiconductor Manufacturing. (In German: Offline-Analyse, Modellierung und Simulation von Transportsystemen in der Halbleiterproduktion.)
  • Tagungsband der 14. ASIM Fachtagung Simulation in Produktion und Logistik, Karlsruhe, Oktober 2010, ISBN 978-3-86644-558, S. 269-276.
• Wustmann, D., und Vasyutynskyy, V., Diagnose komplexer Materialflusssysteme (engl.: Diagnosis of complex material flow systems).
  • Tagungsband des Fachkolloquiums Technische Logistik, Dresden, Januar 2010, ISBN 978-3-86780-153-9, S. 13-25.
• Wustmann, D., Schmidt, Th., and Vasyutynskyy, V., Identification and quantification of anomalies in the behaviour of material flow systems based on event logs. (In German: Identifizierung und Bewertung von Anomalien im Materialflussverhalten auf der Basis von Ereignisdaten.)
  • Tagungsband der 14. ASIM Fachtagung Simulation in Produktion und Logistik, Karlsruhe, Oktober 2010, ISBN 978-3-86644-558, S. 429-436.

3.4.  2009

• Ahmed, A., Menzel, K., Ploennigs, J., and Cahill, B., Aspects of multi-dimensional building performance data management.
  • Proceedings of the 16th Annual Workshop of the European Group for Intelligent Computing in Engineering (EG-ICE 2009), Berlin, Germany, July 2009, pp. 9-16.
• Ahmed, A., Ploennigs, J., Gao, Y., and Menzel, K., Analyse building performance data for energy-efficient building operation.
  • Proceedings of the 26th International Conference on Managing IT in Construction (CIB W78 2009), Istanbul, Turkey, October 2009, pp. 211-220.
• Dementjev, A., Stein, D., and Kabitzsch, K., Control of processes with an integrator and long Dead-Time: the smith predictor vs. virtual sensor.
  • Proceedings of the 5th IEEE Region 8 Eurocon 2009 Conference (Eurocon 2009), Saint-Petersburg, Russia, May 2009, pp. 984-989.
• Dibowski, H., and Kabitzsch, K., Automated design of LON based building automation systems.
  • LonMark Magazine International Editon 5, 1 (2009), pp. 28-31. LonMark International.
• Dibowski, H., und Kabitzsch, K., Automatisierter Entwurf LON-basierter Gebäudeautomationssysteme.
  • LonMark Magazin Deutschland, März (2009), S. 10-14. LonMark Deutschland e.V.
• Kubin, H., Benesch, M., Dementjev, A., Kabitzsch, K., Unkelbach, T., Nyderle, R., and Metzner, C., ADM: A process identification tool for experts and technologists.
  • Proceedings of the 35th Annual Conference of IEEE Industrial Electronics (IECON 2009), Porto, Portugal, November 2009, pp. 1444-1449.
• Kubin, H., Benesch, M., Dementjev, A., Kabitzsch, K., Unkelbach, T., Rogner, F., and Metzner, C., Identification of process models and controller design for vacuum coating processes with a long dead time using an identification tool with advisory support.
  • Proceedings of the 14th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2009), Mallorca, Spain, September 2009, ISBN 978-1-4244-2728-4.
• Luntovskyy, A., Vasyutynskyy, V., and Schill, A., Quantitative models for web 2.0 systems.
  • Polish Journal of Environmental Studies 18, 4A (2009), pp. 44-49.
• Naake, J., Neue Anwendungen für Agentensysteme.
  • Tagungsband zum Fachkolloquium Technische Logistik, Dresden, 27. Februar 2009, ISBN 978-3-86780-108-9, S. 58-69.
• Oezluek, A., Dibowski, H., and Kabitzsch, K., Automated design of room automation systems by using an evolutionary optimization method.
  • Proceedings of the 14th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2009), Mallorca, Spain, September 2009.
• Oezluek, A., Ryssel, U., and Kabitzsch, K., Multi-objective combinatorial optimization for designing room automation systems by using evolutionary algorithms.
  • Proceedings of the 35th Annual Conference of the IEEE Industrial Electronics Society (IECON 2009), Porto, Portugal, November 2009, pp. 3335-3340.
• Ploennigs, J., Vasyutynskyy, V., and Kabitzsch, K., Comparison of Energy-Efficient sampling methods for WSNs in building automation scenarios.
  • Proceedings of the 14th IEEE International Conference on Emerging Techonologies and Factory Automation (ETFA 2009), Mallorca, Spain, September 2009.
• Ploennigs, J., Vasyutynskyy, V., Neugebauer, M., and Kabitzsch, K., Gradient-based integral sampling for WSNs in building automation.
  • Proceedings of the 6th European Conference on Wireless Sensor Networks (EWSN 2009), Cork, Ireland, February 2009.
• Provan, G., Ploennigs, J., Boubekeur, M., Alie, M., and Ahmed, A., Using BIM data for generating and updating diagnostic models.
  • Proceedings of the 12th International Conference on Civil, Structural and Environmental Engineering Computing (CC 2009), Funchal, Portugal, September 2009, Civil-Comp Press, Paper 94.
• Runde, S., Dibowski, H., Fay, A., and Kabitzsch, K., A semantic requirement ontology for the engineering of building automation systems by means of OWL.
  • Proceedings of the 14th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2009), Mallorca, Spain, September 2009.
• Ryssel, U., Dibowski, H., and Kabitzsch, K., Generation of function block based designs using semantic web technologies.
  • Proceedings of the 14th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2009), Mallorca, Spain, September 2009, DOI 10.1109/ETFA.2009.5347080.
• Theiss, S., Vasyutynskyy, V., and Kabitzsch, K., Software agents in industry: a customized framework in theory and praxis.
  • IEEE Transactions on Industrial Informatics 5, 2 (May 2009), pp. 147-156.
• Vasyutynskyy, V., Tuning of event-based PID controls.
  • Proceedings of the Combined Symposium on Networked Control (NE{S|T}COC 2009), Stuttgart, Germany, September 2009, pp. 41-42.
• Vasyutynskyy, V., and Kabitzsch, K., First order observers in Event-Based PID controllers.
  • Proceedings of the 14th IEEE International Conference on Emerging Techonologies and Factory Automation (ETFA 2009), Mallorca, Spain, September 2009.
• Vasyutynskyy, V., and Kabitzsch, K., Time constraints in PID controls with Send-on-Delta.
  • Proceedings of the 8th IFAC International Conference on Fieldbus Systems and their Applications (FeT 2009), Ansan, Korea, May 2009, pp. 48-55.
• Vasyutynskyy, V., und Wustmann, D., Diagnose und Optimierung von Materialflusssteuerungen (engl.: Diagnosis and optimisation of material flow controls).
  • Fachkolloquium Technische Logistik, Dresden, Februar 2009, ISBN 978-3-86780-108-9, S. 47-57.
• Wustmann, D., Vasyutynskyy, V., und Schmidt, T., Ansätze zur automatischen Analyse und Diagnose von komplexen Materialflusssystemen (engl.: Methods for automatic analysis and diagnosis in complex material flow systems).
  • 5. Fachkolloquium der Wissenschaftlichen Gesellschaft für Technische Logistik (WGTL), TU Ilmenau, Oktober 2009, S. 1-19.

3.5.  2008

• Clement, J., und Kabitzsch, K., AAL - Ambient Assisted Living.
  • Der ältere Patient in der Neurochirurgie - interdisziplinär und komplex betrachtet, Kulturhaus Dresden, Dezember 2008. Poster.
• Dementjev, A., Kabitzsch, K., Kubin, H., und Ribbecke, H.-D., Virtuelle intelligente Messmethode zur Optimierung von dynamischen Totzeitprozessen in automatisierten Steuerungssystemen.
  • VDI-Berichte Nr. 2011 (14. Fachtagung "Sensoren und Messsysteme" 2008), Ludwigsburg, März 2008, S. 821-830.
• Dibowski, H., and Kabitzsch, K., Semantic device descriptions based on standard semantic web technologies.
  • Proceedings of the 7th IEEE International Workshop on Factory Communication Systems (WFCS 2008), Dresden, Germany, May 2008, ISBN 978-1-4244-2349-1, pp. 395-404.
• Dibowski, H., Plönnigs, J., und Kabitzsch, K., Automatisierter Entwurf von Gebäudeautomationssystemen. Konzepte und Entwurfsmethoden für ein automatisiertes Engineering.
  • Automatisierungstechnische Praxis 4 (2008), S. 58-67. Oldenbourg Industrieverlag München.
• Kabitzsch, K., Naake, J., Roeder, A., and Vasyutynskyy, V., Rapid migration and commissioning of industrial equipment.
  • Proceedings of the 13th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2008), Hamburg, Germany, September 2008, ISBN 978-1-4244-1505-2, pp. 725-728.
• Luntovskyy, A., Feldmann, M., and Vasyutynskyy, V., A semantic web application for coordination of combined network design.
  • Proceedings of the 18th IEEE International Conference on Microwave & Telecommunication Technology (CRIMICO 2008), Sevastopol, Ukraine, September 2008, pp. 364-367.
• Luntovskyy, A., Vasyutynskyy, V., and Kabitzsch, K., Dynamic evaluation of costs in combined wired and wireless LAN.
  • Proceedings of the 7th IEEE International Workshop on Factory Communication Systems (WFCS 2008), Dresden, Germany, May 2008, ISBN 978-1-4244-2349-1, pp. 349-356.
• Naake, J., und Kabitzsch, K., Autonomer Teleservice zur Langzeitüberwachung und Fehlerdiagnose von entfernten Automationsanlagen.
  • Dresdner Transferbrief 1.08 ”Information und Kommunikation”, 16. Jahrgang (2008), TU Dresden Forschungsförderung / Transfer (Hrsg.), S. 8.
• Ploennigs, J., Jokisch, O., Kabitzsch, K., und Hirschfeld, D., Generierung angepasster, sprachbasierter Benutzerinterfaces für die Heim- und Gebäudeautomation.
  • Erster deutscher Kongress ”Ambient Assisted Living”, Berlin, Februar 2008, VDE, S. 427-432.
• Ploennigs, J., Jokisch, O., Ryssel, U., Kabitzsch, K., and Hirschfeld, D., Generation of adapted, speech-based user interfaces for home and building automation systems.
  • Proceedings of the 7th IEEE International Workshop on Factory Communication Systems (WFCS 2008), Dresden, Germany, May 2008, pp. 445-452.
• Ploennigs, J., Neugebauer, M., and Kabitzsch, K., Control network performance engineering.
  • Proceedings of the 14th GI/ITG Conference on Measurement, Modeling, and Evaluation of Computer and Communication Systems (MMB), Dortmund, Germany, April 2008, pp. 237-252. Best Paper Award.
• Ploennigs, J., Neugebauer, M., and Kabitzsch, K., Diagnosis and consulting for control network performance engineering of CSMA-Based networks.
  • IEEE Transactions on Industrial Informatics 4, 2 (May 2008), pp. 71-79.
• Runde, S., Dibowski, H., Fay, A., and Kabitzsch, K., Integrated automated design approach for building automation systems.
  • Proceedings of the 13th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2008), Hamburg, Germany, September 2008, ISBN 1-4244-1506-3, pp. 1488-1495.
• Theiss, S., Vasyutynskyy, V., and Kabitzsch, K., AMES - a resource-efficient platform for industrial agents.
  • Proceedings of the 7th IEEE International Workshop on Factory Communication Systems (WFCS 2008), Dresden, Germany, May 2008, ISBN 978-1-4244-2349-1, pp. 405-413.
• Vasyutynskyy, V., Luntovskyy, A., and Kabitzsch, K., Limit cycles in PI control loops with absolute deadband sampling.
  • Proceedings of the 18th IEEE International Conference on Microwave & Telecommunication Technology (CRIMICO 2008), Sevastopol, Ukraine, September 2008, pp. 362-363.

3.6.  2007

• Anke, J., und Sell, C., Seamless Integration of Distributed OSGi Bundles into Enterprise Processes using BPEL.
  • Kommunikation in Verteilten Systemen (KiVS), Kurzbeiträge und Workshop der 15. GI/ITG-Fachtagung Kommunikation in Verteilten Systemen (KiVS 2007), Bern, Switzerland, Februar/März 2007.
• Anke, J., Wolf, B., Neugebauer, M., Eisenreich, K., Do, H.-H., und Hackenbroich, G., A Middleware for Real-world Aware PLM Applications.
  • 15. GI/ITG-Fachtagung Kommunikation in Verteilten Systemen (KiVS 2007), Bern, Switzerland, Februar/März 2007.
• Dementjev, A., Kubin, H., Kabitzsch, K., und Metzner, C., Prozessanalyse für das APC an Hochratebeschichtungsprozessen.
  • Tagungsband Mikrosystemtechnik Kongress 2007 (MST-Kongess 2007), Dresden, Oktober 2007, S. 631-634.
• Dementjev, A., Ribbecke, H.-D., Kubin, H., and Kabitzsch, K., Strategy of virtual measurement for optimization of dynamic dead-time processes in automated control systems.
  • Proceedings of the 5th IEEE International Conference on Industrial Informatics (INDIN 2007), Vienna, Austria, July 2007, vol. 1, pp. 565-569.
• Dibowski, H., Kabitzsch, K., Runde, S., und Fay, A., Ein Konzept zur gewerkeübergreifenden Automatisierung von Engineering-Aufgaben in Gebäudeautomatisierungssystemen.
  • VDI-Bericht 1980 (GMA-Kongress 2007. Automation im gesamten Lebenszyklus), Düsseldorf, 2007, VDI Verlag GmbH, ISBN 978-3-18-091980-5, S. 139-148.
• Krause, J., und Cech, S., Ein Prototyp zur zustandsorientierten Instandhaltung.
  • GI Jahrestagung - 2. nationaler Workshop ”Die allwissende Fabrik - Informatik in der Produktion”. Bremen, September 2007.
• Luntovskyy, A., Holstein, S., Vasyutynskyy, V., and Gütter, D., IFC-based building geometry models for computer-aided design of wired and wireless networks.
  • Proceedings of the 17th IEEE International Conference on Microwave & Telecommunication Technology (CRIMICO 2007), Sevastopol, Ukraine, September 2007, pp. 332-335.
• Luntovskyy, A., Vasyutynskyy, V., Oezluek, C., and Gütter, D., Requirement analysis and optimization of combined networks.
  • Proceedings 5th International Conference on Industrial Informatics (INDIN 2007), Vienna, Austria, July 2007, ISBN 1-4244-0864-4, pp. 69-74.
• Naake, J., Theiss, S., und Kabitzsch, K., Softwareagenten: Intelligente Systeme für industrielle E-Services.
  • InnoNet News Nr. 22, Ausgabe August 2007, VDI/VDE Innovation + Technik GmbH, S. 2.
• Ploennigs, J., Guertler, M., Neugebauer, M., and Kabitzsch, K., Automated measurement-based device traffic modeling in control networks.
  • Proceedings of the 5th IEEE International Conference on Industrial Informatics (INDIN 2007), Vienna, Austria, July 2007, pp. 27-32.
• Ribbecke, H.-D., Kabitzsch, K., and Kunath, S., Real-Time-Oriented Identification Strategies for Failure Diagnosis in Complex Automation-Systems.
  • Proceedings of the 5th IEEE International Conference on Industrial Informatics (INDIN 2007), Vienna, Austria, July 2007, pp. 243-248.
• Ryssel, U., Ploennigs, J., Kabitzsch, K., and Folie, M., Generative design of Hardware-in-the-Loop models.
  • Proceedings of the Workshop on Automatic Program Generation for Embedded Systems 2007 (APGES 2007), Salzburg, Austria, October 2007, pp. 4-11.
• Schöbel, E., Sakowski, F., Kabitzsch, K., and Kubin, H., On-line optimization of process steps for sputtering procedures in photovoltaics manufacturing with advances process control (APC).
  • Semicon West 2007, San Francisco, California, USA, July 2007. Poster.
• Theiss, S., Ploennigs, J., Vasyutynskyy, V., Naake, J., and Kabitzsch, K., Interactively configurable framework for industrial agents.
  • Proceedings of the 12th IEEE Conference on Emerging Technologies and Factory Automation (ETFA 2007), Patras, Greece, September 2007, ISBN 1-4244-0826-1, pp. 384-391.
• Vasyutynskyy, V., and Kabitzsch, K., Deadband sampling in PID control.
  • Proceedings of the 5th IEEE International Conference on Industrial Informatics 2007 (INDIN 2007), Vienna, Austria, July 2007, pp. 45-50.
• Vasyutynskyy, V., and Kabitzsch, K., Simple PID control algorithm adapted to deadband sampling.
  • Proceedings of the 12th IEEE Conference on Emerging Technologies and Factory Automation (ETFA 2007), Patras, Greece, September 2007, ISBN 1-4244-0826-1, pp. 932-940.
• Vasyutynskyy, V., and Kabitzsch, K., Towards comparison of deadband sampling types.
  • Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE 2007), Special Session on Network Based Control Systems 2007, Vigo, Spain, June 2007, ISBN 1-4244-0755-9, pp. 2899-2904.
• Vasyutynskyy, V., Luntovskyy, A., and Kabitzsch, K., Two types of adaptive sampling in networked PID control: Time-Variant periodic and deadband sampling.
  • Proceedings of the 17th IEEE International Conference on Microwave & Telecommunication Technology (CRIMICO 2007), Sevastopol, Ukraine, September 2007, ISBN 978-966-335-014-1, pp. 330-331.
• Vasyutynskyy, V., Ploennigs, J., and Kabitzsch, K., Multi-agent system for monitoring of building automation systems.
  • Proceedings of the 7th IFAC International Conference on Fieldbus Systems and their Applications (FeT 2007), Toulouse, France, November 2007, pp. 313-320.

3.7.  2006

• Anke, J., and Kabitzsch, K., Cost-based Deployment Planning for Components in Smart Item Environments.
  • Proceedings of the 11th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2006), Prague, Czech Republic, September 2006.
• Anke, J., Müller, J., Spiess, P., and Weiss F Chaves, L., A Service-Oriented Middleware for Integration and Management of Heterogeneous Smart Items Environments.
  • 4th MiNEMA Workshop, July 2006, Sintra, Portugal, July 2006.
• Anke, J., and Neugebauer, M., Early Data Processing in Smart Item Environments Using Mobile Services.
  • Proceedings of 12th IFAC/IFIP/IFORS/IEEE/IMS Symposium on Information Control Problems in Manufacturing (INCOM06), St. Etienne, France, May 2006.
• Anke, J., and Sundaram, D. Personalization Techniques and Their Application.
  • Encyclopedia of E-Commerce, E-Government, and Mobile Commerce, Mehdi Khosrow-Pour (Editor), Idea Group Reference, Hershey, USA, 2006, ISBN 1-59140-799-0.
• Dementjev, A., und Kabitzsch, K., Testbett für vernetzte Systeme der Raumautomation.
  • Dresdner Transferbrief 1.06 ”Information und Kommunikation”, 14. Jahrgang (2006), TU Dresden Forschungsförderung / Transfer (Hrsg.), S. 7.
• Do, H.-H., Anke, J., and Hackenbroich, G., Architecture Evaluation for Distributed Auto-ID Systems.
  • Proceedings of the 9th International Workshop on Network-based Information Systems, Krakow, Poland, September 2006.
• Dibowski, H., Oezluek, C., Ploennigs, J., and Kabitzsch, K., Realizing the automated design of building automation systems.
  • Proceedings of the 4th IEEE International Conference on Industrial Informatics (INDIN 2006), Singapore, August 2006, pp. 251-256.
• Kabitzsch, K., Monitoring-Werkzeuge für Fabriksteuerungen.
  • 8. Workshop "Simulation und Leistungsbewertung von Fertigungssystemen", TU Dresden, Januar 2006.
• Kabitzsch, K., Naake, J., Theiss, S., und Vasyutynskyy, V., Untersuchung zum Fernzugriff auf Automatisierungstechnik. Ergebnisse einer Befragung von Industrieanwendern.
  • Automatisierungstechnische Praxis 48, Heft 7 (Juli 2006), ISSN 0178-2320, S. 32-37.
• Kabitzsch, K., Vasyutynskyy, V., und Theiss, S., Monitoring und Ergebnisauswertung für Hardware-in-the-Loop - Simulationen (engl.: Monitoring and evaluation of results in the hardware-in-the-loop simulations).
  • Tagungsband 12. ASIM Fachtagung Simulation in Produktion und Logistik, Kassel, September 2006.
• Kubin, H., Lange, K., and Kabitzsch, K. T-PDA real-time, mobile data acquisition for local project management.
  • Proceedings of the 16th International Conference on Intelligent Manufacturing (FAIM 2006), Limerick, Ireland, June 2006.
• Luntovskyy, A., Gütter, D., Vasyutynskyy, V., Karavan, A., and Kabitzsch, K., Integrated design of office communication and building automation networks.
  • Proceedings of the 6th International Workshop on Factory Communication Systems (WFCS 2006), Torino, Italy, June 2006.
• Müller, J., Moreira Sa de Souza, L., Anke, J., and Weiss F Chaves, L., Service-Oriented Integration of Smart Item Networks with Business Applications.
  • 1st International Workshop on Middleware for Sensor Networks (MidSens 2006), in conjunction with MIDDLEWARE 2006, Melbourne, Australia, November 2006.
• Naake, J., Der Analysator "AutoSPy" findet Fehler und optimiert Prozesse.
  • Maschinenbau und Metallbearbeitung Deutschland, Ausgabe August 2006, Kuhn Fachverlag, ISSN 0175-677X, S. 192-193.
• Naake, J., und Kabitzsch, K., Softwareagenten zur Fehlersuche in Echtzeitsteuerungen.
  • Dresdner Transferbrief 1.06 ”Information und Kommunikation”, 14. Jahrgang (2006), TU Dresden Forschungsförderung / Transfer (Hrsg.), S. 6.
• Naake, J., Theiss, S., und Kabitzsch, K., ”Analysator AutoSPy” - Monitoring- und Diagnosewerkzeug für Echtzeitsteuerungen.
  • Tagungsband Entwurf komplexer Automatisierungssysteme 2006 (EKA 2006), Braunschweig, Mai 2006, S. 335-341.
• Neugebauer, M., Ploennigs, J., and Kabitzsch, K., Analysis of duty cycle adaptation in wireless sensor networks.
  • Proceedings of the 11th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2006), Prague, Czech Republic, September 2006, pp. 278-286.
• Neugebauer, M., Ploennigs, J., and Kabitzsch, K., Evaluation of energy costs for single hop vs. multihop with respect to topology parameters.
  • Proceedings of the 6th IEEE International Workshop on Factory Communication Systems (WFCS 2006), Torino, Italy, July 2006, pp. 175-183.
• Ploennigs, J., Buchholz, P., Neugebauer, M., and Kabitzsch, K., Automated modeling and analysis of CSMA type Access-Schemes for building automation networks.
  • IEEE Transactions on Industrial Informatics Vol. 2, No. 2 (May 2006), pp. 103-111.
• Ploennigs, J., Neugebauer, M., and Kabitzsch, K., Automated model generation for performance engineering of building automation networks.
  • International Journal on Software Tools for Technology Transfer 8, No. 6 (Nov. 2006), ISSN 1433-2779, pp. 607-620.
• Ryssel, U., Ploennigs, J., and Kabitzsch, K., Generative function block design and composition.
  • Proceedings of the 6th IEEE International Workshop on Factory Communication Systems (WFCS 2006), Torino, Italy, July 2006, pp. 253-263.
• Schill, A., Luntovskyy, A., Vasyutynskyy, V., Gütter, D., and Pfeifer, G. Approaches to the integrated network design for modern health care institutions.
  • Elektronika I Swjas (ELSW 2006), Vol.1, Kiew, 2006, ISSN 1811-4512, pp. 114-121.
• Theiss, S., Naake, J., and Kabitzsch, K., PLC-integrated process monitoring and prediction of the resulting real-time load.
  • Proceedings of the 4th IEEE International Conference on Industrial Informatics (INDIN 2006), Singapore, August 2006, pp. 880-885.
• Vasyutynskyy, V., and Kabitzsch, K., Implementation of PID controller with Send-On-Delta sampling.
  • Proceedings of the International Control Conference 2006 (ICC 2006), Glasgow, Scotland, August/September 2006.
• Vasyutynskyy, V., Luntovskyy, A., Karavan, A., Kabitzsch, K., and Gütter, D., Integrated design of office communication and building automation networks.
  • Proceedings of the 6th IEEE International Workshop on Factory Communication Systems (WFCS 2006), WIP Track, Torino, Italy, June 2006, pp. 235-238.
• Weiss F Chaves, L., Anke, J., Moreira Sa de Souza, L., and Müller, J., Service Lifecycle Management Infrastructure for Smart Items.
  • 1st International Workshop on Middleware for Sensor Networks (MidSens 2006), in conjunction with MIDDLEWARE 2006, Melbourne, Australia, November 2006.

3.8.  2005

• Anke, J., and Främling, K., Distributed Decision Support in a PLM scenario.
  • Proceedings of the 14th Product Data Technology Europe Symposium (PDT 2005), Amsterdam, Netherlands, September 2005, ISBN 91 631 5417 X, pp. 129-137.
• Bäurle, G., SPS-Detektiv entdeckt sporadische Fehler.
  • IEE, 50. Jahrgang, Heft 4 2005, S. 30-33
• Dementjev, A., and Kabitzsch, K., Knowledge-Based services in building management: Online advisory expert system.
  • Proceedings of the 22nd Conference on Information Technology in Construction (cibw 2005), Dresden, Germany, July 2005, ISBN 3-86005-478-3, pp. 605-609.
• Kabitzsch, K., Data Mining für Ingenieure - erste Ergebnisse für InSitu-APC.
  • Tagungsunterlagen, AIS-User-Konferenz, Dresden, Juni 2005 (auf CD).
• Kabitzsch, K., Hartebrodt, M., Kubin, H., and Dementjev, A., Data Mining and Control Model Generation - Results of Process Analysis with Data Mining at Inline Coating Systems.
  • Proceedings of the Workshop on Advanced Process Control for Future Oriented Manufacturing, Dresden, Germany, September 2005 (on CD).
• Kabitzsch, K., Vasyutynskyy, V., and Kotte, G., Troubleshooting in MES of semiconductor factory.
  • Proceedings of the 18th International Conference on Production Research (ICPR 2005), Salerno, Italy, July 2005, pp. 182-190.
• Karavan, A., Neugebauer, M., and Kabitzsch, K., Integration of Building Automation Network Design and 3D Construction Tools by IFC2x Standard.
  • Proceedings of the 6th IFAC International Conference on Fieldbus Systems and their Applications (FeT 2005), Puebla, Mexico, November 2005, pp. 247-254
• Karavan, A., Neugebauer, M., and Kabitzsch, K., Merging Building Automation Network Design and IFC 2x Construction Projects.
  • Proceedings of the 22nd Conference on Information Technology in Construction (CIB-W078 2005), Dresden, Germany, July 2005, ISBN 3-86005-478-3, pp. 575-581.
• Naake, J., und Kabitzsch, K., Agenten in der Steuerung (Prozessüberwachung in Echtzeitsteuerungen).
  • Automatisierungsatlas 2005/2006. Technik-Dokumentations-Verlag, Marburg, 2005, S. 108-110.
• Neugebauer, M., Der neue Funkstandard - drahtlose Datenübertragung in Gebäuden nach IEEE 802.15.4 / Zigbee.
  • CCI Print, 39. Jahrgang, Nr. 3 / März 2005, S. 37-38
• Neugebauer, M., Plönnigs, J., und Kabitzsch, K., Energieeffizienz durch Duty Cycle Anpassung.
  • Tagungsband 4. GI/ITG KuVS Fachgespräch Sensornetze, Zürich, Schweiz, März 2005, S. 97-101.
• Neugebauer, M., Plönnigs, J., and Kabitzsch, K., A new beacon order adaptation algorithm for IEEE 802.15.4 networks.
  • Proceedings of the 2nd European Workshop on Wireless Sensor Networks (EWSN 2005), Istanbul, Turkey, February 2005, ISBN 0-7803-8801-1, IEEE Catalog No. 05EX960, pp. 302-311.
• Neugebauer, M., Ploennigs, J., and Kabitzsch, K., Duty cycle adaptation with respect to traffic.
  • Proceedings of the 10th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2005), Catania, Italy, September 2005, vol. 2, ISBN 0-7803-9402-X, pp. 425-432.
• Ploennigs, J., Neugebauer, M., and Kabitzsch, K., Fault analysis of control networks designs.
  • Proceedings of the 10th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2005), Catania, Italy, September 2005, vol. 2, ISBN 0-7803-9402-X, pp. 477-484.
• Ribbecke, H.-D., Kabitzsch, K., Kost, A., and Richter, A., Strategies of Fault Identification in Automated Systems.
  • Proceedings of the IEEE International Workshop on Intelligent Signal Processing (WISP 2005), Faro, Portugal, September 2005 (on CD).
• Röder, A., Vasyutynskyy, V., Kabitzsch, K., Zarbock, T., and Luhn, G., Log-based state machine construction for analyzing internal logistics of semiconductor equipment.
  • Proceedings of the International Conference on Modeling and Analysis of Semiconductor Manufacturing 2005 (MASM 2005), Singapore, October 2005, ISBN 981-05-4194-5, pp. 54-60.
• Röder, A., Vasyutynskyy, V., Zarbock, T., Kabitzsch, K., and Luhn, G., Automatic state machine construction for analysing internal logistics of semiconductor equipment.
  • 6th European AEC/APC Conference, Dublin, Ireland, April 2005. Poster.
• Ryssel, U., Neugebauer, M., Stein, G., und Kabitzsch, K., Low-cost Protokollanalysator zur Messung von Transaktionszeiten.
  • Tagungsband 6. Workshop Performance Engineering in der Softwareentwicklung, Berlin, Juni 2005, ISBN 3-929757-81-8, S. 35-40.
• Schill, A., Luntovskyy, A., Pfeifer, G., Gütter, D., Panchenko, A., and Vasyutynskyy, V., Computer Network Modeling and Analysis Using XML-Descriptions.
  • Proceedings of the 9th World Multi-Conference on Systemics, Cybernetics and Informatics (WMSCI 2005), Orlando, Florida, USA, July 2005, Vol. II, ISBN 980-6560-29-9, pp. 283-288.
• Schöbel, E., and Kabitzsch, K., In-Situ APC: A New Generation of APC Framework Based on EDA & RaP Interface Standards.
  • Proceedings of the 6th AEC/APC European Advanced Equipment Control / Advanced Process Control Conference, Dublin, Ireland, April 2005 (on CD).
• Vasyutynskyy, V., Plönnigs, J., and Kabitzsch, K., Passive monitoring of control loops in building automation.
  • Proceedings of the 6th IFAC International Conference on Fieldbus Systems and their Applications (FET 2005), Mexico, November 2005, pp. 263-269.

3.9.  2004

• Buchholz, P., and Plönnigs, J., Analytical analysis of access-schemes of the CSMA type.
  • Proceedings of the 5th IEEE International Workshop on Factory Communication Systems (WFCS 2004), Vienna, Austria, September 2004, ISBN 0-7803-8734-1, pp. 127-136.
• Dementjev, A., and Kabitzsch, K., A consulting module in room automation.
  • Proceedings of the 1st IFAC Symposium on Telematics Applications in Automation and Robotics (IFAC TA 2004), Helsinki, Finland, June 2004, pp. 37-42.
• Dementjev, A., and Kabitzsch, K., An Online Advisory Expert System for Building Automation.
  • Journal of Computer and System Sciences International, Vol. 43, No. 5, May 2004, ISSN 1064-2307, pp. 785-791.
• Dementjev, A., und Kabitzsch, K., Beratungsmodul zur Gebäudeautomatisierung (russ.).
  • Izvestia Rossiiskoi Akademii Nauk: Teoriya i Systemy Upravleniya, 2004, ISSN 0002-3388.
• Hartebrodt, M., and Kabitzsch, K., Fault Detection in Fieldbuses with Time Domain Reflectometry.
  • Proceedings of the 7th IEEE Africon Conference (AFRICON 2004), Gaborone, Botswana, September 2004, Vol. 1, ISBN 0-7803-8605-1, pp. 391-396.
• Kabitzsch, K., Kotte, G., and Vasyutynskyy, V., Monitoring and diagnosis in MES of semiconductor manufacturing with EXTRAKT.
  • Proceedings of the 11th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2004), Salvador, Brazil, April 2004.
• Kabitzsch, K., und Neugebauer, M., Künftige Standards für Sensor-Aktor-Netze im "intelligenten Gebäude".
  • 2. Fachgespräch Sensornetze, Karlsruhe, Februar 2004.
• Naake, J., und Kabitzsch, K., Softwareagenten zur Fehlersuche in Echtzeitsteuerungen.
  • Dresdner Transferbrief 2004, Heft 2, S. 4
• Neugebauer, M., and Kabitzsch, K., A New Protocol for a Low Power Sensor Network.
  • Proceedings of the 23rd IEEE International Performance Computing and Communications Conference (IPCCC 2004), EWCN Workshop on Energy-Efficient Wireless Communications and Networks, Phoenix / Arizona, USA, April 2004, pp. 393-399
• Neugebauer, M., and Kabitzsch, K., Sensor Lifetime Using SendOnDelta.
  • Lecture Notes in Informatics Vol. P-51, Proceedings of the 34. Jahrestagung der GI, Ulm, Germany, September 2004, ISBN 3-88579-380-6, ISSN 1617-5468, pp. 360-364.
• Neugebauer, M., und Kabitzsch, K., Lösungen zur drahtlosen Low-Power Kommunikation.
  • VDI-Berichte 1843, VDI-Verlag Düsseldorf, VDI-Fachtagung Funkgestützte Kommunikation in der industriellen Automatisierungstechnik, Düsseldorf, Mai 2004, ISBN 3-18-091843-8, ISSN 0083-5560, S. 83-90.
• Neugebauer, M., and Kabitzsch, K., Proposal and Application Aware Analysis of a Wireless Sensor Network Protocol.
  • Proceedings of the 11th International Telecommunications Network Strategy and Planning Symposium (networks 2004), Vienna, Austria, June 2004, ISBN 3-8007-2840-0, pp. 237-242.
• Neugebauer, M., Plönnigs, J., Kabitzsch, K., and Buchholz, P., Automated modeling of LonWorks building automation networks.
  • Proceedings of the 5th IEEE International Workshop on Factory Communication Systems (WFCS 2004), Vienna, Austria, September 2004, ISBN 0-7803-8734-1, pp. 113-118.
• Plönnigs, J., Neugebauer, M., and Kabitzsch, K., A traffic model for networked devices in the building automation.
  • Proceedings of the 5th IEEE International Workshop on Factory Communication Systems (WFCS 2004), Vienna, Austria, September 2004, ISBN 0-7803-8734-1, pp. 137-145.
• Plönnigs, J., Neugebauer, M., and Kabitzsch, K., Automated model generation from design databases at the example of building automation networks.
  • Proceedings of the 1st International Symposium on Leveraging Applications of Formal Methods (ISoLA 2004), Paphos, Cyprus, November 2004, pp. 320-327.
• Rögner, F.-H., Kabitzsch, K., und Dreyer, T., Neue Möglichkeiten der Qualitätssicherung bei der plasmaaktivierten Hochratebedampfung.
  • Tagungs-CD BMBF-Innovationsforum "Der Elektronenstrahl als Werkzeug", Dresden, April 2004.
• Rögner, F.-H., Kabitzsch, K., and Dreyer, T., New Possibilities of Quality Assurance for Plasma Activated High-Rate Electron Beam Deposition.
  • Proceedings of ebeam2004, October 2004, Reno (Nevada), USA
• Schach, R., Otto, J., und Dementjev, A. Vom Bleistift zum Transponder: Neue Gedankenansätze zur Stammdatenerfassung.
  • Gebäude-Management 2004, Jahrgang 9, Heft 1-2, S. 40-41.
• Stein, G., Composite Ports for an Architecture-Oriented Assembling of Components.
  • Proceedings of the 5th IEEE International Workshop on Factory Communication Systems (WFCS 2004), Vienna, Austria, September 2004, ISBN 0-7803-8734-1, pp. 119-124.
• Vasyutynskyy, V., and Kabitzsch, K., Architecture and data model for monitoring of distributed automation systems.
  • Proceedings of the 1st IFAC Symposium on Telematics Applications in Automation and Robotics (IFAC TA 2004), Helsinki, Finland, June 2004, pp. 19-24.